Concrete PP Polypropylene Fibre Mesh Cement Fiber 25MM 38MM 50MM
1,Description:

ELT-FIBRIL fiber with 100% virgin homopolymer polypropylene as its raw material, this fiber was produced by special technology.
The products appear net-like structure with many fiber monofilaments connected. When the fiber is put into the concrete, the horizontal
structure in fiber monofilament can be destroyed in the course of stirring owing to friction and rubbing, and the fiber monofilament or
net-like structure will fully stretch, thus the concrete is reinforced by a great number of polypropylene fibers.

ELT-FIBRIL is a Fibrillated (MESH) polypropylene microfiber for concrete reinforcement that complies with ASTM C 1116, Standard
Specification for Fiber Reinforced Concrete and Shotcrete, and is specifically designed to help mitigate the formation of plastic shrinkage
cracking in concrete. Typically used at a dosage rate of 0.6kg/m3 to 1.8kg/m3.
 

2,Typical physical properties:
As a new type concrete-strengthening fiber, it becomes a new popular subject in the field of fiber concrete research and application after
glass fiber and steel fiber.Reinforced Functions to Concrete: compared with steel fiber, full-dispersed polypropylene fiber has advantages
in its thinness, large amount, non-water absorbency, strong acid & alkali resistance and similar elastic modulus with that of concrete.
The reinforced functions run as follows;
1,Increase seepage resistance      2,Prolong endurance         3, Improve steel protection
4,Increase cracking resistance      5,Increase fire resistance   6,Strengthen spurt & fatigue
7,Improve tensile, bending & folding strength      8,Improve plastic deformity  9,Strong acid & alkali resistance and good endurance

3,Production Process:

4,Application:

A). Projects like concrete road, bridge, airport road and factory floor which strictly require cracking resistance.
     The life span of these projects will be lengthened for 5-10 years.
B). The walls of tunnels, mines, roofs and reservoir projects with special construction. When using spray technology in concrete construction,
the polypropylene fiber added into the concrete can effectively decrease the spray concrete's deformation rate of the walls less than 8% and
that of the roof less than 12%, and also can reduce the friction. It can improve the constructing efficiency and working environment and
popularize the spray technology.
C). River courses and dams, etc. The polypropylene fiber can improve concrete's resistance to crack and squirt and wear to lengthen projects' life span.
D). Military defense works, dock banks and piers, etc. This fiber can greatly strengthen the concrete's spurt resistance and
heighten these projects' safety and lengthen their life span.

5, Specification:

6,PACKING:

Packing 1: 0.6/0.9/1.0 per PE Film Bag, 10kg/12kg per plastic woven bag,6Ton/20'gp,13Ton/40'HQ
Packing 2: 0.6/0.9/1.0 per water soluble Paper bag, 10kg/Carton,9.9Ton/40'HQ
Packing 3, 0.6/0.9/1.0 per water soluble Paper bag, 10kg/Plastic Woven bag,11Ton/40'HQ
Packing 4: other packing quantity can negotiate         


7. Instruction: 

A). Dosage: For resist the common cracks on surfaces, 0.9kg/m3 fibers to cement mortar Is enough,and for increasing reinforce and seepage
resist application 1.8kg/m3 is enough. 
B). Stirring requirement: The proportion of cement, sand and aggregate is no need to be changed. Put cement, aggregate, additive and fiber
together, then stir after adding enough water and time for stirring can be prolonged for 2~3 minutes in order to make the compound mix completely.
Also it can be mixed with cement and other aggregates in advance, stirring by adding water at worksite before construction. 


8, Our Company Information:

Anhui Elite Industrial Co.,LTD was established in 2007, has become one of the leading and professional suppliers of all kinds of Concrete Reinforcement
Fibers, concrete addmixtures in the world market.Our Product were widely used in all kinds of concrete, mortar, plaster projects and exported tomore than
30 countries, Such as USA, Russia, Germany, Australia, Chile, UAE, Korea, Vietnam, Africa etc.
Our Fibers was made by 100% Virgin Material with advanced equipment of yard and cutting, we have one full set of precise testing instrument,
testing equipment and quality inspection team, technology research and development team.
the management system was certified by ISO9001 and our products have been passed the CE Certification.

Our Mainly Product and Production Capacity as below:

9,Our Certificate: